A rapid,highly efficient,and general protocol for the synthesis of functionalized triarylmethanes: a straightforward access for the synthesis of (−)-tatarinoid C

A rapid, efficient, and convenient synthesis of functionalized triarylmethane is described by the Friedel–Crafts alkylation of methoxybenzenes with a variety of aldehydes in the presence of BF₃·OEt₂. The generality of the method is demonstrated by screening a variety of di- or tri-substituted arenes as well as substituted aromatic, heteroaromatic, and aliphatic aldehydes. (−)-Tatarinoid C is synthesized in a single step following the same protocol.     

Rapid microwave-assisted preparation of binary and ternary transition metal sulfide compounds

Transition metal chalcogenides are of interest for energy applications, including energy generation in photoelectrochemical cells and as electrodes for next-generation electrochemical energy storage. Synthetic routes for such chalcogenides typically involve extended heating at elevated temperatures for multiple weeks. We demonstrate here the feasibility of rapidly preparing select sulfide compounds in a matter of minutes, rather than weeks, using microwave-assisted heating in domestic microwaves. We report the preparations of phase pure FeS₂, CoS₂, and solid solutions thereof from the elements with only 40 min of heating. Conventional furnace and rapid microwave preparations of CuTi₂S₄ both result in a majority of the targeted phase, even with the significantly shorter heating time of 40 min for microwave methods relative to 12 days using a conventional furnace. The preparations we describe for these compounds can be extended to related structures and chemistries and thus enable rapid screening of the properties and performance of various compositions of interest for electronic, optical, and electrochemical applications.     

Minimizing Temperature Bias through Reliable Temperature Determination in Gas-Solid Photothermal Catalytic Reactions

Enormous advances in photothermal catalysis have been made over the years, whereas the temperature assessment still remains controversial in the majority of photothermal catalytic systems. Herein, we methodically uncovered the phenomenon of temperature determination bias arising from prominent temperature differences in gas-solid photothermal catalytic systems, which extensively existed yet has been overlooked in most relevant cases. To avoid the interference of temperature bias, we developed a universal protocol for reliable temperature evaluation of gas-solid photothermal catalytic reactions, with emphasis on eliminating the temperature gradient and temperature fluctuation of catalyst layer via optimizing the reaction system. This work presents a functional and credible practice for temperature detection, calling attention to addressing the effects of temperature differences, and reassessing the actual temperature-based performances in gas-solid photothermal catalysis.     

Ru(bpy)32+-Enabled Cell-Surface Photocatalytic Proximity Labeling toward More Efficient Capture of Physically Interacting Cells

Intercellular proximity labeling has emerged as a promising approach to enable the study of cell-cell interactions (CCIs), but the efficiency of current platforms is limited. Here, we use Ru(bpy)₃²⁺ to construct an efficient photocatalytic proximity labeling (PPL) system on the cell surface that allows the highly discriminative CCI detection with spatiotemporal resolution. Through the mechanism study and quantitative characterization on living cells, we demonstrate that the singlet-oxygen (¹O₂) mechanism is more efficient and specific than the single electron transfer (SET) mechanism in Ru-mediated PPL. Ru(bpy)₃²⁺ catalysts with different cell-anchoring moieties are prepared to facilitate the catalyst loading on primary cells. Finally, based on this system, we develop a “live” T cell receptor (TCR) multimer with TCR-T cells that could sensitively identify and discriminate cells presenting antigens of different affinity, providing a powerful tool to better understand the heterogeneity of antigen presenting cells.     

A Humidity-Induced Large Electronic Conductivity Change of 107 on a Metal-Organic Framework for Highly Sensitive Water Detection

The electronic conductivity (EC) of metal–organic frameworks (MOFs) is sensitive to strongly oxidizing guest molecules. Water is a relatively mild species, however, the effect of H₂O on the EC of MOFs is rarely reported. We explored the effect of H₂O on the EC in the MOFs (NH₂)₂-MIL-125 and its derivatives with experimental and theoretical investigations. Unexpectedly, a large EC increase of 10⁷ on H₂SO₄@(NH₂)₂-MIL-125 by H₂O was observed. Brønsted acid–base pairs formed with the −NH₂ groups, and H₂SO₄ played an important role in promoting the charge transfer from H₂O to the MOF. Based on H₂SO₄@(NH₂)₂-MIL-125, a high-performance chemiresistive humidity sensor was developed with the highest sensitivity, broadest detection range, and lowest limit of detection amongst all reported sensing materials to date. This work not only demonstrated that H₂O can remarkably influence the EC of MOFs, but it also revealed that post-modification of the structure of MOFs could enhance the influence of the guest molecule on their EC to design high-performance sensing materials.     

便携式X射线荧光光谱仪在污染场地中重金属检测的应用

为探究便携式X射线荧光光谱法(Portable X-ray fluorescence spectrometry method, PXRF)测定结果的不确定度, 应用PXRF法和传统实验室方法对湖南某典型有色金属污染场地及周边土壤中的重金属进行测定,通过建立线性回归模型对比分析两种方法的测定数据,探究了PXRF法测定数据的准确程度和置信区间。结果表明,PXRF法原位、异位测定值与传统实验室方法测定值均能呈现较好的线性相关性,As、Cu、Pb、Cd等元素的决定性系数(R2)均大于0.70,其检测数据质量均能达到定量水平;PXRF法与实验室方法测定值间比率的置信区间结果显示,Cd元素的准确性最好,其次为Pb、Cu、As,比率置信区间分别为(0.57, 1.89)、(0.38, 2.22)、(0.31, 2.25)、(0.20, 4.53)。由此可见,PXRF法是一种方便快捷且相对准确的土壤重金属现场检测方法,可广泛地应用于污染场地调查和土壤修复工程实践中。     

Electrophoresis-Assisted Multilayer Assembly of Nanoparticles for Sensitive Lateral Flow Immunoassay**

Lateral flow immunoassay (LFIA) is a rapid, simple, and inexpensive point-of-need method. A major limitation of LFIA is a high limit of detection (LOD), which impacts its diagnostic sensitivity. To overcome this limitation, we introduce a signal-enhancement procedure that is performed after completing LFIA and involves controllably moving biotin- and streptavidin-functionalized gold nanoparticles by electrophoresis. The nanoparticles link to immunocomplexes forming multilayer aggregates on the test strip, thus, enhancing the signal. Here, we demonstrate lowering the LOD of hepatitis B surface antigen from approximately 8 to 0.12 ng mL⁻¹, making it clinically acceptable. Testing 118 clinical samples for hepatitis B showed that signal enhancement increased the diagnostic sensitivity of LFIA from 73 % to 98 % while not affecting its 95 % specificity. Electrophoresis-driven enhancement of LFIA is universal (antigen-independent), takes two minutes, and can be performed by an untrained person.     

Plasmon-Enhanced Electrochemiluminescence at the Single-Nanoparticle Level

Plasmon-enhanced electrochemiluminescence (ECL) at the single-nanoparticle (NP) level was investigated by ECL microscopy. The Au NPs were assembled into an ordered array, providing a high-throughput platform that can easily locate each NP in sequential characterizations. A strong dependence of ECL intensity on Au NP configurations was observed. We demonstrate for the first time that at the single-particle level, the ECL of Ru(bpy)₃²⁺-TPrA was majorly quenched by small Au NPs (<40 nm), while enhanced by large Au ones (>80 nm) due to the localized surface plasmon resonance (LSPR). Notably, the ECL intensity was further increased by the coupling effect of neighboring Au NPs. Finite Difference Time Domain (FDTD) simulations conformed well with the experimental results. This plasmon enhanced ECL microscopy for arrayed single NPs provides a reliable tool for screening electrocatalytic activity at a single particle.     

Morphology controllable conjugated network polymers based on AIE-active building block for TNP detection

Luminescent conjugated network polymer is one of the most promising chemo-sensors owing to their good chemical/optical stability and multiple functionalization.Herein,three conjugated network polymers were prepared by using aggregation-induced emission active 1,1,2,2-tetrakis(4-formyl-(1,1'-biphenyl))-ethane(TFBE) unit as monomer and hydrazine as linker.Through regulating the synthetical condition,the polyme ric network can form either unifo rm two-dimensional azine-linked nanosheets(ANS),conjugated microporous polymers(A-CMP) or covalent organic frameworks(A-COF).All of these polymers exhibited good stability and high fluorescence quantum efficiency with the quantum yield of6.31% for A-NS,5.26% for A-CMP,and 5.80% for A-COF,as well as fast and selective fluorescence quenching response to 2,4,6-trinitrophenol(TNP).And the best TNP sensing performance with the Stern-Volmer constants(K_(sv)) values up to 8 × 10~5 L/mol and a detection limit of 0.09 μmol/L was obtained for A-NS.The study explores various strategies to construct conjugated polymers with different nanoarchitectures based on the same building block for sensitive detection of explosives.